microHELIX Test
Probes your fine-pitch

Model 600366 Test Probe



Model 600366 HELIX

Ordering Part Number 600366
Descrpitive Model Name S400*6350/1500/30@750/B1900c4.Au/S0a.Au
material body (spring & coil component): 304SS
Plunger: BeCu, Beryllium Copper
I/o end: SS20AP Steel
length body: 6350 m (0.25 inches)
Plunger: 1900 m (0.075 inches)
I/o end: 0 m (0 inches)
Length Over All (LOA) 8250 m (0.325 inches)
alternate lengths Inquire to for other plunger/i/o end lengths)
diameter body: 406 µm (0.016 inches)
Plunger: 320 µm (0.016 inches)
I/o end: 406 µm (0.016 inches)
plunger tip shape 4-point crownplunger tip
pin2 tip shape annulari/o end
alternate plunger & i/o end tip shapes See Probe Group S400*6350-P1 or contact
spring type rectangular helix integral to tube
spring force 30 grams at 750 m (1.1 oz@0.03) inches
spring compliance 1500 m (0.059 inches) maximum
750 µm (0.03 inches) recommended
plating body: 35 µinches Type II Gold
Plunger & i/o end: 35 µinches Type II Gold
Contact for other plating.
lubricant between plunger and probe body none: gold on gold wiping contact
probe resistance < 50 milliohms
μHELIX® spring life > 106cycles at recommended compression
installed pointing accuracy drill accuracy 20 m (0.0008 inch)
probe-guide drill size #77; 457 m (0.018 inches)
plunger-guide drill size #80; 343 m (0.0135 inches)

AlphaTest Home faq Products Contact register