microHELIX Test
Probes your fine-pitch
connection

Model 600369 Test Probe

 

 

Model 600369 HELIX

Ordering Part Number 600369
Descrpitive Model Name S300*2300/300/30@150/B1000c4.Au/S0a.Au
material body (tube/coil component): 304SS
Plunger: BeCu, Beryllium Copper
I/o end: 304SS
length body: 2300 m (0.091 inches)
Plunger: 1000 m (0.039 inches)
I/o end: 0 m (0 inches)
Length Over All (LOA) 3300 m (0.13 inches)
alternate lengths See Probe Group S300*2300-P1
or contact
diameter body: 305 µm (0.012 inches)
Plunger: 221 µm (0.009 inches)
I/o end: 305 µm (0.012 inches)
plunger tip shape 4-point crownplunger tip
i/o end tip shape annulari/o end
alternate plunger tip shapes See Probe Group S300*2300-P1
or contact
alternate i/o end tip shapes See Probe Group S300*2300-P1
or contact
spring type rectangular helix integral to tube
spring force 30 grams at 150 m (1.1 oz@0.006 inches)
spring compliance 300 m (0.012 inches) maximum
150 µm (0.006 inches) recommended
plating body: 35 µinches Type II Gold
Plunger: 35 µinches Type II Gold
I/o end: 35 µinches Type II Gold
Contact for other plating.
lubricant none: gold on gold wiping contact
probe resistance < 65 milliohms
μHELIX® spring life > 106cycles at recommended compression
installed pointing accuracy drill accuracy 20 m (0.0008 inch)
INSTALLATION NOTES:
probe-guide drill size #80; 343 m (0.0135 inches)
plunger-guide drill size #88; 240 m (0.0094 inches)

AlphaTest Home faq Products Contact register