Model 600514 µHELIX® Test Probes
| Ordering Part Number | 600514 |
| Descriptive Model Name | S400*4500/900/30@450/S1300r/S1300s |
| material | body (tube & coil component): 304SS plunger: Steel pin2: Steel |
| length | body: 4500 µm (0.177 inches) plunger: 1300 µm (0.051 inches) pin2: 1300 µm (0.051 inches) |
| Length Over All (LOA) | 7,10 mm (0.280 inches) |
| alternate lengths | 3,05 mm LOA, S400*2440-P1 Group 5,10 mm LOA, S400*3800-P1 Group 5,60 mm LOA, S400*3000-P1 Group 7,10 mm LOA, S400*4500-P2 Group 8,00 mm LOA, S400*5500-P2 Group 8,25 mm LOA, S400*6350-P1 Group 10,15 mm LOA, S400*6350-P2 Group |
| diameter | body: 406 µm (0.016 inches) plunger: 320 µm (0.013 inches) pin2: 320 µm (0.013 inches) |
| plunger tip shape: round |  |
| alternate plunger tip shapes | sharp, flat, 4-point crown |
| pin2 tip shape: sharp |  |
| alternate pin2 tip shapes | round, flat, 4-point crown |
| spring type | rectangular helix integral to tube |
| spring force | 30 grams (1.1 oz) at 450 �m |
| spring compliance | 900 µm (0.035") maximum 450 µm (0.014 inches) recommended |
| plating | body: 35 µinches Type II Au plunger: 35 µinches Type II Au |
| lubricant between plunger and probe body | none: gold on gold wiping contact |
| probe resistance | < 100 milliohms |
| continuous current | > 2 Amps |
| μHELIX® spring life | > 106cycles at recommended compliance |
| installed pointing accuracy | drill accuracy ±20 µm (0.0008") |
| INSTALLATION NOTES: | |
| probe-guide drill size | #77; 457 µm (0.018") |
| plunger-guide drill size | #80; 343 µm (0.0135") |
| pin2 pin-guide drill size | #80; 343 µm (0.0135") or larger ... up to #77 |
|
|
|
|
|