microHELIX Test
Probes your fine-pitch
connection

Model 600630 Test Probe

 

 

Model 600630 HELIX

Ordering Part Number 600630
Descrpitive Model Name S400*6350/1200/60@600/B1900c4.Au/B1900c4.Au
material body (spring & coil component): 304SS
Plunger: BeCu, Beryllium Copper
Pin2: BeCu, Beryllium Copper
length body: 6350 m (0.25 inches)
Plunger: 1900 m (0.075 inches)
pin2: 1900 m (0.075 inches)
Length Over All (LOA) 10150 m (0.4 inches)
alternate lengths Inquire to for other plunger/pin2 lengths)
diameter body: 406 µm (0.016 inches)
plunger: 320 µm (0.013 inches)
pin2: 320 µm (0.013 inches)
plunger tip shape 4-point crownplunger tip
pin2 tip shape 4-point crownpin2
alternate plunger & pin2 tip shapes See Probe Group S400*6350-P2 or contact
spring type rectangular helix integral to tube
spring force 100 grams at 600 m (3.5 oz@0.024) inches
spring compliance 1200 m (0.047 inches) maximum
600 µm (0.024 inches) recommended
plating body: 35 µinches Type II Gold
Plunger & pin2: 35 µinches Type II Gold
Contact for other plating.
lubricant between plunger and probe body none: gold on gold wiping contact
probe resistance < 60 milliohms
continous current > 2 Amps
μHELIX® spring life > 106cycles at recommended compression
installed pointing accuracy drill accuracy 20 m (±0.0008 inch)
INSTALLATION NOTES:
probe-guide drill size #77; 0.457 mm (0.018 inches)
plunger-guide drill size #80; 0.343 mm (0.0135 inches)
i/o end-guide drill size => #80; 0.343 mm (0.0135 inches)

AlphaTest Home faq Products Contact register