microHELIX Test
Probes your fine-pitch
connection

Model 600701 Test Probe

 

 

Model 600701 µHELIX®

Ordering Part Number 600701
Descriptive Model Name S200*3800/700/20@350/B1300c4.Au/S0a.Au
material body (tube/coil component): 304SS
plunger: BeCu, Beryllium Copper
i/o end: 304SS
length body: 3800 µm (0.15 inches)
plunger: 1300 µm (0.051 inches)
i/o end: 0 µm (0 inches)
Length Over All (LOA) 5100 µm (0.201 inches)
alternate lengths See Probe Group S200*3800-P1
or contact
diameter body: 203 µm (0.008 inches)
plunger: 140 µm (0.006 inches)
i/o end: 203 µm (0.008 inches)
plunger tip shape 4-point crownplunger tip
i/o end tip shape annulari/o end
alternate plunger tip shapes See Probe Group S200*3800-P1
or contact
alternate i/o end tip shapes See Probe Group S200*3800-P1
or contact
spring type rectangular helix integral to tube
spring force 20 grams at 350 µm (0.7 oz @ 0.014 inches)
spring compliance 700 µm (0.028 inches) maximum
350 µm (0.014 inches) recommended
plating body: 35 µinches Type II Gold
plunger: 35 µinches Type II Gold
i/o end: 35 µinches Type II Gold
Contact for other plating.
lubricant none: gold on gold wiping contact
probe resistance < 80 milliohms
μHELIX® spring life > 106cycles at recommended compression
installed pointing accuracy drill accuracy ±20 µm (0.0008 inch)
INSTALLATION NOTES:
probe-guide drill size #88; 241 µm (0.0095 inches)
plunger-guide drill size #96; 160 µm (0.0063 inches)

AlphaTest Home faq Products Contact register