microHELIX Test
Probes your fine-pitch
connection

Model 600832 Test Probe

 

 

Model 600832 µHELIX®

Ordering Part Number 600832
Descriptive Model Name S200*2300/300/20@150/S1000r.Au/S1000f.Au
material body (tube/coil component): 304SS
plunger: SS20AP Steel
pin2: SS20AP Steel
length body: 2300 µm (0.091 inches)
plunger: 1000 µm (0.039 inches)
pin2: 1000 µm (0.039 inches)
Length Over All (LOA) 4300 µm (0.169 inches)
alternate lengths See Probe Group S200*2300-P2
or contact
diameter body: 203 µm (0.008 inches)
plunger: 140 µm (0.006 inches)
pin2: 140 µm (0.006 inches)
plunger tip shape roundedplunger tip
i/o end tip shape flatpin2
alternate plunger tip shapes See Probe Group S200*2300-P2
or contact
alternate pin2 tip shapes See Probe Group S200*2300-P2
or contact
spring type rectangular helix integral to tube
spring force 20 grams at 150 µm (0.7 oz @ 0.006 inches)
spring compliance 300 m (0.012 inches) maximum
150 µm (0.006 inches) recommended
plating body: 35 µinches Type II Gold
plunger: 35 µinches Type II Gold
pin2: 35 µinches Type II Gold
Contact for other plating.
lubricant none: gold on gold wiping contact
probe resistance < 130 milliohms
μHELIX® spring life > 106cycles at recommended compression
installed pointing accuracy drill accuracy ±20 µm (0.0008 inch)
INSTALLATION NOTES:
probe-guide drill size #88; 241 µm (0.0095 inches)
plunger-guide drill size #96; 160 µm (0.0063 inches)
i/o end-guide drill size #96; 160 µm (0.0063 inches)

AlphaTest Home faq Products Contact register