| S500*6350-P2 Group | Body (Tube/Coil) | Pin1 (s,r,f) | Pin1 (c4) | Pin2 (s,r,f) | Pin2 (c4) | |
|---|---|---|---|---|---|---|
| Tip Shapes: | sharp (s), flat (f), radiused (r) 4-point crown (c4) | |||||
| Material: | 304 stainless steel | SS20AP | BeCu | SS20AP | BeCu | |
| Lengths: | 6350 µm (0.250") | 1900 µm (0.075") | 1900 µm (0.075") | |||
| Length Overall: | Length Overall (LOA) = 10,150 mm (0.400") | |||||
| Minimum Spacing | 592µm (0.023") true center-to-center spacing | |||||
| Diameter: | 508 µm (0.020") | 356 µm (.014") | 356 µm (.014") | |||
| Structure: | integrated, rectangular helix | Plunger | External Pin | |||
| Spring Force: | Option-30g: 30 grams (1.1 oz) force at 750 µm compression | |||||
| Option-100g: 100 grams (3.5 oz) force at 600 µm compression | ||||||
| Probe's Compliance | Option-30g: MAX 1500 µm (0.059") | Typical use 750 µm (0.030") | |||||
| Option-100g: MAX 1200 µm (0.047") | Typical use 600 µm (0.024") | ||||||
| Plating | Tube, spring, and pins: Nickel flash +35 µinches Type II (hard) gold | |||||
| Lubricant: | none | none | none | none | none | |
| probe resistance | <50 milliohms | |||||
| µHELIX spring life | > 106 cycles of operation at 'typical' compression | |||||
| Installed Pointing Accuracy | drill accuracy ±20 µm (±0.0008") | |||||
| INSTALLATION NOTES: | ||||||
| probe-guide plate drill size:" | #74; 572 µm (0.0225") | |||||
| pin-guide plate drill size: | 1/64"; 397 µm (0.0156") | |||||
|
|
|
|
|