| S400*6350-P1 Group | Body (Tube/Coil) | Plunger (s,r,f) | Plunger (c4) | ||
|---|---|---|---|---|---|
| Tip Shapes: | sharp (s), flat (f), radiused (r) 4-point crown (c4) | ||||
| Material: | 304 stainless steel | SS20AP | BeCu | ||
| Lengths: | 6350 µm (0.250") | 1900 µm (0.075") | |||
| Length Overall: | Length Overall (LOA) = 8,25mm (0.325") | ||||
| Minimum Spacing | 477 µm (0.0188") true center-to-center spacing | ||||
| Diameter: | 406 µm (0.016") | 320 µm (.0126") | |||
| Structure: | integrated, rectangular helix | Exernal Pin & Internal Plunger | |||
| Force: | Option-30g: 30 grams (1.1 oz) force at 750 µm (0.030") compression | ||||
| Option-100g: 100 grams (3.5 oz) force at 600 µm (0.024") compression | |||||
| Compliance | Option-30g: MAX - 1500 µm (0.059") | Typical - 750 µm (0.030") | ||||
| Option-100g: MAX - 1200 µm (0.0478") | Typical - 600 µm (0.024") | |||||
| Plating | Tube/spring & pin: Nickel flash +35 µinches Type II (hard) gold | ||||
| Lubricant: | none | none | none | ||
| Probe Resistance | <60 milliohms for >106 cycles of operation | ||||
| µHELIX spring life | > 106 cycles of operation at 'typical' compression | ||||
| Installed Pointing Accuracy | drill accuracy ±20 µm (±0.0008") | ||||
| INSTALLATION NOTES: | |||||
| probe-guide plate drill size:" | #77; 457 µm (0.018") | ||||
| pin-guide plate drill size: | #80; 343 µm (0.0135") | ||||
| PartNum | Descriptive Model name | Tip Shape | i/o end * | Force |
|---|---|---|---|---|
| 600244 | S400*6350/1500/30@750/S1900s/S0a | Sharp | S0a | 30g |
| 600245 | S400*6350/1500/30@750/S1900r/S0a | Round | S0a | 30g |
| 600246 | S400*6350/1500/30@750/S1900f/S0a | Flat | S0a | 30g |
| 600366 | S400*6350/1500/30@750/B1900c4/S0a | 4-Point Crown | S0a | 30g |
| 600235 | S400*6350/1200/30@600/S1900s/S0a | Sharp | S0a | 100g |
| 600236 | S400*6350/1200/30@600/S1900r/S0a | Round | S0a | 100g |
| 600237 | S400*6350/1200/30@600/S1900f/S0a | Flat | S0a | 100g |
| 600308 | S400*6350/1200/30@600/B1900c4/S0a | 4-Point Crown | S0a | 100g |
|
|
|
|
|
